Keysight N777 C Series - System:communicate:ethernet:domainname; System:communicate:ethernet:domainname:current; System:communicate:ethernet:hostname

48 Keysight N777xC Series Tunable Laser Family Programming Guide
3 Instrument Setup and Status
Command: :SYSTem:COMMunicate:ETHernet:DOMainname?
Syntax: :SYSTem:COMMunicate:ETHernet:DOMainname?
Description: Get the domain name.
Parameters: None
Response: String
Example: :syst:comm:eth:dom? -> “.companyname.com”
Command: :SYSTem:COMMunicate:ETHernet:DOMainname
Syntax: :SYSTem:COMMunicate:ETHernet:DOMainname
Description: Set the domain name (used if DHCP is disabled).
Parameters: String
Response: None
Example: :syst:comm:eth:dom “.companyname.com”
Command: :SYSTem:COMMunicate:ETHernet:DOMainname:CURRent?
Syntax: :SYSTem:COMMunicate:ETHernet:DOMainname:CURRent?
Description: Get the currently used domain name.
Parameters: None
Response: String
Example: :syst:comm:eth:dom:curr? -> “.companyame.com”
Command: :SYSTem:COMMunicate:ETHernet:HOSTname
Syntax: :SYSTem:COMMunicate:ETHernet:HOSTname
Description: Set the host name.