Keysight N9020B - Page 2392

7 Save/Recall/Print
7.3 Save
–
RFBurst Trigger Delay State
–
RFBurst Trigger Level Abs
–
RFBurst Trigger Level Rel
–
RFBurst Trigger Level Type
–
RFBurst Trigger Slope
–
Scale/Div
–
Trigger Holdoff
–
Trigger Holdoff State
–
TriggerSource
The header section is followed by a line containing items MeasResult1 through
MeasResult4. This line forms a header for each set of measurement results, which
are listed in subsequent lines. Each line of Measurement Results consists of 4
comma-separated values, from the MeasResult1 value to the MeasResult4 value.
The MeasResult1 set in the file corresponds to the data returned by
MEAS|READ|FETCh:PSTatistic1; the MeasResult2 set corresponds to the data
returned by MEAS|READ|FETCh:PSTatistic2, and so on.
Meas Results File Example
When imported into Microsoft Excel or a similar spreadsheet application, a typical
Meas Results file appears as shown in the example below.
MeasResult
SA:PST
A.10.53 N9030A
526 ALV ATP B1X B1Y B25
B40 BBA CR3 CRP DCF
DDA DP2 DRD EA3 EDP
EMC EP1 ERC ESC ESP EXM
FSA LFE LNP MAT MPB NFE
NUL P26 PFR PNC RTL RTS
S40 SB1 SEC SM1 TVT YAS
YAV
1
Automatic Trigger Time 0.1
Automatic Trigger Time
State
FALSE
CcdfCurrentCounts 6087500
2392 Vector Modulation Analyzer Mode User's &Programmer's Reference