Table Of Contents
10.2.18 Trigger Delay 2638
10.2.19 Trigger Level 2638
10.2.20 Trigger Slope 2638
10.2.21 Trigger Source 2638
10.2.22 Trigger Timeout 2639
10.2.23 Signal Input 2639
10.2.24 Use Preselector 2639
10.2.25 Channel Bandwidth Array 2639
10.2.26 Channel Filter Type Array 2640
10.2.27 Channel Filter Alpha Array 2640
10.2.28 Channel Measurement Function Array 2640
10.2.29 Channel Offset Frequency Array 2641
10.2.30 Channel Occupied Bandwidth Percent Array 2641
10.2.31 Channel x-dB Bandwidth Array 2642
10.3 Define Fast Power Measurement Query (Remote Command Only) 2643
10.4 Configure Fast Power Measurement (Remote Command Only) 2644
10.5 Initiate Fast Power Measurement (Remote Command Only) 2645
10.6 Fetch Fast Power Measurement (Remote Command Only) 2646
10.7 Execute Fast Power Measurement (Remote Command Only) 2647
10.8 Binary Read Fast Power Measurement (Remote Command Only) 2648
10.9 Diagnostic Binary Read Fast Power Measurement (Remote
Command Only) 2649
Vector Modulation Analyzer Mode User's &Programmer's Reference 83
To Next Page
Loading...
