Table Of Contents
3.6.1.1 Normal 1134
3.6.2 Windows 1134
3.6.2.1 Graph 1134
3.6.2.2 Metrics 1135
3.6.3 Amplitude 1137
3.6.3.1 Y Scale 1137
Ref Level Offset 1137
Minimum Probability 1138
3.6.3.2 Attenuation 1139
Full Range Atten 1141
Mech Atten 1142
Elec Atten 1144
Adjust Atten for Min Clipping 1148
Adjust Atten 1148
Pre-Adjust for Min Clipping 1149
Mech Atten Step 1153
Max Mixer Level 1154
Max Mixer Lvl Rules 1154
3.6.3.3 Range (Baseband Input models) 1155
Range Auto/Man 1156
I Range 1157
Q Range 1158
Q Same as I 1159
3.6.3.4 Range (Non-attenuator models) 1160
Range 1160
Adjust Range for Min Clipping 1161
Pre-Adjust for Min Clipping 1161
Peak-to-Average Ratio 1162
Mixer Lvl Offset 1163
3.6.3.5 Signal Path 1163
Presel Center 1163
Preselector Adjust 1165
Internal Preamp 1166
LNA 1167
µW Path Control 1169
Software Preselection 1178
SW Preselection Type 1179
SW Preselection BW 1180
High Freq Prefilter 1181
3.6.4 BW 1182
3.6.4.1 Settings 1182
Info BW 1182
3.6.5 Display 1184
Spectrum Analyzer Mode User's &Programmer's Reference 27
To Next Page
Loading...
