Keysight N9020B - CF Step

3 Spectrum Analyzer Mode
3.4 Occupied BW Measurement
Notes Span Auto Detector ([:SENSe]:OBWidth:FREQuency:SPAN:AUTO) is only available in the
MSR, LTEAFDD/LTEATDD and 5GNR modes
Dependencies The Auto Detect functionality is only available in the MSR, LTEAFDD/LTEATDD and 5GNR modes
Preset
Mode Value
SA
3 MHz
WCDMA
10 MHz
LTEAFDD, LTEATDD
10 MHz
BT
2 MHz
5GNR
Automatically calculated
RTS
27 kHz
MSR
10 MHz
WLAN
Radio Std Value
802.11b 30MHz
802.11a/g/n/ac/ax/be (20MHz) 25 MHz
802.11n/ac/ax/be (40MHz) 50 MHz
802.11n/ac/ax/be (80MHz) 100 MHz
802.11ac/ax/be (160MHz) 200 MHz
802.11be (320MHz) 400 MHz
State Saved Yes
Min 100 Hz
Max Hardware Maximum Span
Backwards
Compatibility SCPI
[:SENSe]:EBWidth:FREQuency:SPAN
CF Step
Changes the step size for the center frequency and start and stop frequency
functions. Once a step size has been selected, and the center frequency function is
active, the step keys (and the UP|DOWN parameters for Center Frequency from
remote commands) change the center frequency by the step-size value. The step
size function is useful for finding harmonics and sidebands beyond the current
frequency span of the instrument.
Note that Start Frequency and Stop Frequency also step by the CF Step value.
Remote Command
[:SENSe]:FREQuency:CENTer:STEP[:INCRement] <freq>
Spectrum Analyzer Mode User's &Programmer's Reference 789