3 Spectrum Analyzer Mode
3.3 Channel Power Measurement
If neither of the above is true for a given point, then:
–
If that point in SecondTrace is equal to maxtracevalue, the resultant point is
mintracevalue.
–
If that point in SecondTrace is equal to mintracevalue, the resultant point is
maxtracevalue.
How trace math is processed
Whenever a trace math function is turned on, or the parameters and/or operands of
an existing trace math function are changed, the destination trace is cleared. After
the trace is cleared, all x-axis values in the trace, and the domain of the trace, are
set to match the X-Axis settings of the first trace operand. When this is complete, a
new sweep is initiated.
The process of acquiring data, processing it using the math and Average/Hold
functions, and presenting it as trace data, consists of several functional blocks, as
shown below:
704 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
