2 Operations and Features
50 Keysight U3401A User’s and Service Guide
The elapsed time is recorded when the MinMax operation is selected. The elapsed
time is shown on the secondary display with HH.MM.SS.
– HH is 0-19 hours
– MM is 0-59 minutes
– SS is 0-59 seconds
Procedure
1 Press to enable MinMax operation.
2 Press continuously until the desired operation appear. The MinMax
operation will display MINMAX > MAX > MIN > MINMAX in sequence when
this key is press continuously.
3 Press to disable the MinMax operation.
To Next Page
Loading...
