Keysight U3401A - Figure 2-3 Typical Max Operation Display; Figure 2-4 Typical Min Operation Display; Minmax

Operations and Features 2
Keysight U3401A User’s and Service Guide 49
MinMax
The MinMax (Minimum/Maximum) operation stores the minimum and maximum
values of reading during a series of measurements.
When enabled, the MinMax operation turns on the MINMAX annunciator and
begins accumulating various statistics of the readings being displayed.
Figure 2-3 Typical Max operation display
Figure 2-4 Typical Min operation display
Each time a new minimum or maximum value is stored, the multimeter beeps
once (if the beeper is enabled) and briefly turns on the appropriate MAX or MIN
annunciator.
Accumulated statistics are:
– MAX—maximum reading since MinMax was enabled
– MIN—minimum reading since MinMax was enabled
– MINMAX—actual readings
Elapsed time
Elapsed time