Operations and Features 2
Keysight U3401A User’s and Service Guide 53
Hold
The reading hold feature allows you to capture and hold a reading on the front
panel display. When enabled, the Hold operation turns on the HOLD annunciator
and hold the reading.
Procedure
1 Press to hold the reading on the display.
Figure 2-6 Typical Hold operation display
Refresh Hold
The refresh hold operation allows you to take measurement in dangerous or
difficult measuring field and you could not look at the display. This operation will
update the hold value with a new measurement value automatically, and thus
reminds you with a beep.
Procedure
1 Press to access to the Setup menu.
2 Use and to select the rHold.
3 Press to enter the second tier menu. Use and to set the
state to ON.
To Next Page
Loading...
