6
Unpacking and setup
• Remove the scale from the box and place it on a firm, level surface.
• Avoid locations with rapid temperature changes, excessive dust, moisture, air currents, vibrations,
electromagnetic fields, heat or direct sunlight.
• Adjust the leveling feet until the bubble is centered in the circle of the level indicator (located on the
front panel).
• NOTE: Ensure that the scale is level each time its location is changed.
• Before using the scale for the first time, the internal rechargeable battery should be fully charged for at
least 12 hours.
• Connect the supplied AC adapter to the power input receptacle underneath the scale. Plug the AC
adapter into a power outlet and the battery will begin charging.
• If the scale will be stored or transported in the future, save the packaging material to ensure the best
possible protection for the scale.
Contents
• Scale
• 6Vdc4AH lead-acid battery (installed in scale housing)
• 12Vdc/2000mA UL adapter with positive center
• Manual
To Next Page
Loading...
