5
-27
OPERATION
TREAD
When working the fields where plants
are in rows, it is necessary to change
the wheel tread so that the tires would
not pass over the plants. It is also nec-
essary to widen wheel tread to de-
crease danger when working on slopes
or hills, or when doing trailer work, etc.
(1) Bolt (2) Rim Bolt (3) Disc
Follow same checking procedure
when tractor is first used.
To decrease the wheel tread dan-
ger when working on slopes or
hills, or when working with trail-
er, etc.
Do not use tires larger than spe-
cified.
WARNING
!!
!!
!
Never operate tractor with a loose
rim, wheel, or axle.
Always tighten nuts to the speci-
fied torque.
Check all of them frequently and
keep them tight.
IMPORTANT
S43O531A
S43O534A
To Next Page
Loading...
