5
-29
OPERATION
BALLAST
Add weight to front end if needed for
stability. Heavy pulling and heavy rear
mounted implements tend to lift front
wheels. Add enough ballast to main-
tain steering control and prevent tip
over. Remove weight where it is no
longer needed. Front weights are avail-
able from your
KIOTI Dealer. Your dealer
can help you decide how much is re-
quired for your particular application.
SELECTING FRONT BALLAST
Additional ballast may be
needed for transporting heavy
integral implements. When
implement is raised, drive
slowly over rough ground, re-
gardless of how much ballast is
used.
!!
!!
!
CAUTION
77.16 lbs. X 10 Pieces
(35 kg X 10 Pieces)
Model Maximum weight
DK90
Always attach tires as shown in
the above drawings.
If not attached as illustrated,
transmission parts may be
damaged.
WHEEL BOLTS
IMPORTANT
202.5~235.1lbf·ft
(274.6~318.7N.m)
(28 ~ 32.5 kgf.m)
DK90
Model Torque
RIM BOLTS
202.5~245.9lbf·ft
(274.6~333.4N.m)
(28 ~ 34 kgf.m)
Model Torque
DK90
Model
AG
Tread (A)
60.1 in
(1,534 mm)
DK90
To Next Page
Loading...
