Chapter 2 Basic Operation 2-2
2. 1 Turning on KIP 7170
1. Plug the power cord for KIP 7170 into a dedicated wall outlet.
2. Press “ | ” side the Power Switch on the right side of the printer to turn on the KIP 7170.
Power Switch Press “ | “ side.
WARNING
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Make sure to earth the machine for safety.
(3) Do not plug the printer into a multi-wiring connector in which other devices are plugged.
It may overheat the outlet and may result in a fire.
(4) The OUTLET must satisfy the following conditions.
In the U.S.A. : 120V plus/minus 10%, 50/60Hz and 15A
In Europe : 220-240V plus 6% or minus 10%, 50/60Hz and 10A
To Next Page
Loading...
