KIP 7970 - Replacing Toner Cartridge

Chapter 2 Basic Operations 2-13
2. 4 Replacing Toner Cartridge
1. Open the Manual Table.
2. Pull out the Upper Frame Unit to your side (front) with holding both handles.
WARNING
There is combustible powder in the toner cartridge.
Do not burn up the used toner cartridge.
Reference
When the toner is empty, the UI Screen will display Toner Empty sign.
Follow the later procedure (or as noted in the UI’s User Guide) to
replace the Toner Cartridge with a new one (genuine).
NOTE
(1) The KIP 7970 will indicate Toner Empty sign if an incorrect toner cartridge or no toner
cartridge is installed to the printer.
(2) At the machine’s installation, some amount of initial toner powders will be supplied to the
machine. Thus Toner Empty sign might appear slightly earlier for the first installed toner
cartridge than usual.
Manual Table
Handle
Upper Frame Unit