Need help?Do you have a question about the KIP 800 and is the answer not in the manual?
General| Brand | KIP |
|---|---|
| Model | 800 |
| Category | All in One Printer |
| Language | English |
Explains general safety symbols like WARNING, CAUTION, Do Not Attempt, and Pay Attention.
Details crucial warnings regarding grounding, power source, circuit breakers, and electrical shock prevention.
Outlines cautions for installation environment, handling hot parts, and ventilation to prevent injury or damage.
Specifies criteria for selecting the correct power plug, including voltage, current, and grounding.
Lists various power cord configurations, their standards, ratings, and typical geographical usage.
Details the necessary conditions for installing the equipment, including power source, circuit, and site environment.
Lists types of documents that cannot be legally copied or duplicated due to laws or copyrights.
Describes the key functionalities and technological highlights of the KIP 800 Series printers.
Provides detailed technical specifications for the printer part, including model, method, speed, and power.
Details technical specifications for the scanner unit, including method, speed, resolution, and thickness handling.
Illustrates and names the various external parts of the printer from different views.
Outlines requirements and restrictions for using different types of printing paper and media.
Defines the acceptable standards for documents intended for scanning, including dimensions and types.
Step-by-step instructions on how to power on the KIP 800 Series printer.
Procedures for safely shutting down the KIP 800 Series printer and its controller unit.
Guides on how to load new paper rolls into the printer's media decks.
Instructions for loading single sheets of paper into the manual feeder.
Detailed steps for removing and installing new toner cartridges into the printer.
Procedures for identifying, removing, and replacing the waste toner collection box.
Steps to perform copying operations using the KIP 860 model.
Instructions on how to abort ongoing scanning or copying processes.
Identifies common locations and causes of paper jams (mis-feeds) within the printer.
Specific instructions for clearing paper jams occurring in the roll decks (Decks 1, 2, 3, 4).
Guidance on how to resolve paper jams in the manual feeder section of the printer.
Steps to clear paper jams in the media feed path, including registration and separation mis-feeds.
Procedures for clearing paper jams that occur in the fuser unit, including safety precautions.
Instructions for removing paper jams from the upper exit area of the printer.
Steps to clear a mis-fed original from the scanner unit on the KIP860.
How to resolve error messages indicating that a cover or door has been left open.
Explains common operator notifications like roll replacement or toner replacement.
Information on how to handle service errors and contact technical support.
Instructions for cleaning the scan glass, feed rollers, and guide plates of the scanner unit.
Guidance on cleaning the sensors within the scanner unit to ensure accurate detection.
Method for cleaning the printer's touch screen display.
To Next Page
