11 Troubleshooting
No. Troubleshooting Causes and Solutions
1 Failed to power on
A．Check if the battery is used up –charge the battery or change it if
the power is out.
B. Check if the power connecting pole is in proper contact with
battery –try again after re-attachment.
C. Check if the battery contact is contaminated or in poor contact
2
Communication
failed
A. Inconsistent frequency between radios – select a channel with
the same frequency.
B. Different CTCSS/CDCSS signaling –re-set with PC.
C. Beyond communication scope.
To Next Page
Loading...
