English
17
Cleaning the Blender
• Clean the Blender thoroughly after every use. Be sure to unplug before cleaning.
• To avoid damaging the Blender, do not immerse the Blender base or cord in water.
• To avoid scratching the Blender, do not use abrasive cleansers or scouring pads.
1
To clean the Blender base and cord:
Unplug the Blender before cleaning.
Wipe with a warm, damp cloth; wipe
clean with a damp cloth, and dry with
a soft cloth. Make sure to clean inside
the ingredient feed each time.
TIPS FOR GREAT RESULTS
2
To quickly clean the Blender while
in the base: Add 1 drop of dish soap
to half a pitcher of water, and run on
the Icy Drinks/Smoothies cycle. Discard
water when cycle is finished, and rinse
completely.
3
To clean pitcher, lid, ingredient cap, and funnel: Wash all items in the dishwasher
on the top or bottom rack. Or hand wash with soapy water, rinse, and wipe dry.
CARE AND CLEANING
NOTE: For best results when cleaning the Blender, completely disassemble the lid,
ingredient cap and funnel and thoroughly wash all parts after each use.
W10683173B_01_EN_v02.indd 17 1/20/15 12:47 PM
To Next Page
Loading...
