EasyManua.ls Logo

KitchenAid KERC600 - Page 48

KitchenAid KERC600
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
Most cooking problems often are caused by little things you can find and fix without
tools of any kind. Check the lists below and on the next page before calling for
assistance or service. If you still need help, see “Requesting Assistance or Service”
on page 50 or 51.
If nothing operates, check the following:
Is the range wired into a live circuit with the proper voltage?
(See Installation Instructions.)
Have you blown a household fuse or tripped a circuit breaker?
T
roubleshooting
Other possible problems and their causes:
PROBLEM
The oven will not
operate
The surface cook-
ing areas will not
operate
The control knob(s)
will not turn
The Self-Cleaning
cycle will not
operate
Cooking results
are not what you
expected
CAUSE
You have not set the electronic control correctly. Refer to
the section in this manual describing the function you are
operating.
You have programmed a delayed start time. Wait for the
starttime to be reached or cancel and reset the controls.
You have blown a household fuse or tripped a circuit
breaker.
You have not set the control knobs correctly. Push control
knobs in before turning to a setting.
You are not pushing in before turning.
You have programmed a delayed start time. Wait for the
start time to be reached or cancel and reset the controls.
The range is not level. (See Installation Instructions.)
The oven temperature seems too low or too high. See
“Adjusting the oven temperature” on page 33 to adjust oven
temperature.
You did not preheat the oven before baking (if called for
in recipe).

Related product manuals