KitchenAid KERC600 - Setting the Clock; Using the Timer

25
Setting the clock
NOTE: If an oven function is active or pro-
grammed, you cannot change the clock.
1. Press CLOCK SET/START.
2. Set time.
3. Start clock.
If time has not been entered correctly,
3 short tones will sound and “Err”
will be displayed. The display will show
the closest valid time. Repeat Steps
2 and 3 to re-enter the time of day.
NOTE: You can clear the time of day
from the display by opening the door,
then pressing and holding CLOCK SET/
START for 5 seconds. Repeat to see
time of day on display again.
Using the timer
The Timer does not start or stop the oven.
It works like a regular kitchen timer. It can
be set in hours and minutes up to 99 hours,
59 minutes or in minutes and seconds up to
99 minutes, 59 seconds.
1. Press TIMER SET/START.
• Once to set hours and minutes
• Twice to set minutes and seconds
PRESS YOU SEE
CLOCK
SET START
•
PRESS YOU SEE
HR MIN MIN SEC
MIN SEC
PRESS YOU SEE
START
MIN SEC
PRESS YOU SEE
HR MIN
(example shows hours
and minutes)
SET START
•
TIMER
CONTROL
LOCK
3
CONTROL
LOCK
3
0
Using and Caring for Your Oven
continued on next page