EasyManua.ls Logo

KitchenAid W10216167A - Secure the Dish Drawers

KitchenAid W10216167A
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
8. Attach the toe kick bracket to the frame.
9. Place trim strip into toe kick bracket.
10. Attach toe kick bracket on the opposite side.
11. Place flexible side trim strips on both sides as shown.
12. Slide the dishwasher back into position in the cabinet
opening. Check to ensure that the drain hose and electrical
wiring are not kinked.
Secure the Dish Drawers
1. Remove top drawer (same procedure as followed to remove
bottom drawer) and set drawer on bottom drawer separated
with corner packaging.
2. Attach dishwasher to the lower cabinet mounting bracket
(installed earlier).
A. Attach dishwasher to lower cabinet mounting bracket.
1
1
2
2
A

Table of Contents

Related product manuals