KITO EQ series Assembly/Disassembly Manual

26 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

Persons performing disassembly/reassembly

Disassembly/reassembly shall be performed by a competent person (a person duly authorized by the company as having

expertise on the structure and device of the electric chain hoist) or consult KITO.

This Disassembly and Reassembly Manual includes contents to prevent injury to any person performing

disassembly and reassembly, users, and other persons and damage to property, and to disassemble/

reassemble the electric chain hoist safely and correctly.

Before performing disassembly/reassembly, be sure to read and follow this manual as well as the EQ

Series Electric Chain Hoist Owner’s Manual (separate document) since its contents are also important for

disassembly/reassembly.

Disassembly/reassembly of the electric chain hoist is required operations for regular inspection and repair.

Carry out disassembly/reassembly properly in accordance with these manuals.

Safety precaution

EQ Series Electric Chain Hoist (125kg to 1t)

Disassembly and Reassembly Manual

AS No.EQ-1209-MG-01

Table of Contents

Other manuals for KITO EQ series

Owner's Manual126 pages

Questions and Answers:

K
kstephensAug 20, 2025
What to do if my KITO EQ Chain Hoists electric chain hoist does not operate without load?
- S
  Shannon HenryAug 20, 2025
  If your KITO Chain Hoists electric chain hoist isn't working without a load, it could be due to several reasons: * Improper source voltage, so check the power. * Breakage and burning of the control circuit, so check the circuit breaker, power cable, internal wiring, HBB Board, VFD, or upper/lower limit switch. * Breakage and burning of the power circuit, so check the motor or internal wiring. * VFD trip due to motor overheat (electronic thermal relay), so check the VFD. * VFD overheat, so check the VFD.
J
Juan ObrienAug 22, 2025
Why does my KITO EQ electric chain hoist operate without load?
- Y
  Yesenia CampbellAug 22, 2025
  If your KITO Chain Hoists electric chain hoist is operating without a load, the causes could be: * Overload (Clutch activated), so check the friction clutch. * Voltage drop, so check the power cable. * Low source voltage, so check the power. * Faulty braking resistor, so check the braking resistor.
S
Suzanne RoseAug 25, 2025
What to do if my KITO Chain Hoists does not stop normally?
- R
  Ryan DeanAug 25, 2025
  If your KITO Chain Hoists does not stop normally, it could be due to: * Abrasion of brake lining, so check the brake. * Negative phase connection of motor lead wires, so check the power cable. * Wrong connection, so check the internal wiring. * Push Button Switch.
R
Rachel KruegerAug 26, 2025
What to do if KITO Chain Hoists operates differently from the indication of the Push Button Switch?
- C
  copelandraymondAug 26, 2025
  If your KITO Chain Hoists operates differently from the indication of the Push Button Switch, the issue might stem from: * Negative phase connection of motor lead wires, so check the motor. * Wrong connection, so check the internal wiring. * Push Button Switch. * Breakage of control circuit, so check the internal wiring or push button switch. * Faulty electrical part, so check the VFD, HBB Board, or Upper/Lower Limit Switch.
A
Amber DavisAug 28, 2025
Why KITO Chain Hoists makes an abnormal noise?
- J
  Jennifer GreeneAug 28, 2025
  Abnormal noise in your KITO Chain Hoists may be caused by: * Abrasion of the Load Chain, so check the load chain. * Abrasion of the Load Sheave, so check the load sheave. * Abrasion or breakage of Gear, so check the gears. * Deterioration of Bearing, so check the bearing. * Dragging, so check the brake. * Abrasion of brake lining, so check the brake.
A
Amanda SchmidtAug 29, 2025
Why am I getting an electric shock from my KITO EQ?
- P
  Patricia AndersonAug 29, 2025
  If you experience an electric shock when touching the body or the Push Button Switch of your KITO Chain Hoists, it's likely due to improper grounding or a broken earth wire. To resolve this, ensure the grounding work is performed securely.
B
bradley32Aug 31, 2025
What to do if my KITO electric chain hoist does not operate?
- A
  adam86Aug 31, 2025
  If your KITO electric chain hoist isn't operating, begin by measuring the voltage of each phase at the power receiving terminal. If the source voltage is incorrect, inspect the power receiving facility to ensure it is providing the correct voltage.

KITO EQ series Specifications

General

Brand	KITO
Model	EQ series
Category	Chain Hoists
Language	English

Related product manuals

Preview: KITO ER2M

Preview: KITO ED Series

Preview: KITO ER2 Series

KITO ER2 Series

Preview: KITO TCR Series

KITO TCR Series