Safety Precaution
....................................................................................2
Table of Contents
.....................................................................................4
Disassembly and Reassembly Tools
.......................................................5
Name of Parts
..........................................................................................6
Disassembly Procedure
.........................................................................10
1. Removing the outer circumference parts
...................................10
2.
Disconnecting the power supply cable and push button cord
....10
3. Removing the internal electrical components
............................. 11
4. Disassembling the gear parts .....................................................11
5. Disassembling the load chain circumference
.............................12
6. Disassembling the load sheave
..................................................13
7. Removing the suspension eye ...................................................13
8. Removing the chain guide ..........................................................13
9. Removing the braking resistor
....................................................13
10. Disassembling the motor and brake .........................................14
Reassembly Procedure .........................................................................15
1. Assembling
the rotor (when disassembled to the pull rotor)
........15
2. Assembling the stator and rotor..................................................15
3. Assembling the suspension eye .................................................17
4. Assembling the braking resistor and fan cover...........................17
5. Assembling the chain guide assembly
.......................................17
6. Assembling the load sheave.......................................................18
7. Installing the load chain ..............................................................19
8. Assembling the gear parts
..........................................................20
9. Assembling the internal electrical components ..........................21
10. Connecting the power supply cable and push button cord .....22
11. Installing the bottom hook (if removed from the chain)
.............23
12. Oil lling ....................................................................................24
13. Operation check, etc. ...............................................................24
Table of Contents
Table of Contents