EasyManuals Logo

KITO EQ series Assembly/Disassembly Manual

KITO EQ series
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
DANGER
Disassembly and reassembly (general)
Safety Precaution
Safety Precaution
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Mandatory
Mandatory
Mandatory
Mandatory
Do not use gear oil or grease in areas near a re or spark.
Failure to follow this instruction may result in re or severe injury arising from ignition.
Carry out the installation or removal work of the electric chain hoist after securing the stable foothold.
Failure to follow this instruction may result in death or severe injury due to falling or dropping.
Do not cut, extend, or weld the load chain.
Failure to follow this instruction may result in death or severe injury.
Carry out the installation or removal work of the electric chain hoist after shutting down
the power distribution panel.
Failure to follow this instruction may result in death or severe injury due to an electric shock.
When reassembly is complete, perform a function check (preoperational check) to make sure
it operates properly.
Failure to follow this instruction may result in death or severe injury.
For details, refer to ‘Periodic Inspection’ in the separated Owner’s Manual.
Tighten the bolts and nuts with the specied tightening torque.
Failure to follow this instruction may result in death or severe injury.
Only competent persons must disassemble/reassemble the electric chain hoist.
Disassembly/reassembly by anyone other than competent persons may result in death or severe injury.
Do not use unauthorized parts for EQ series electric chain hoist.
Even if the part is an authorized part, it may not be used for a different model.
Use parts correctly in accordance with this manual.
Failure to follow this instruction may result in death or severe injury.
Do not perform disassembly/reassembly during conduction.
Failure to follow this instruction may result in death or severe injury due to an electric shock or
unexpected operation.
Do not adjust or disassemble the friction clutch.
Failure to follow this instruction may result in death or severe injury.
If adjustment and disassembly are required, contact KITO.
Prohibited
Do not disassemble/reassemble the electric chain hoist subject to a load.
When disassembling/reassembling an electric chain hoist, place it on a oor and perform them on the workbench.
Failure to follow this instruction may result in death or severe injury.

Other manuals for KITO EQ series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KITO EQ series and is the answer not in the manual?

KITO EQ series Specifications

General IconGeneral
BrandKITO
ModelEQ series
CategoryChain Hoists
LanguageEnglish

Related product manuals