KKT KSC Series Installing Instruction

39 pages

To Next Page

Installing Instruction

Installing InstructionInstalling Instruction

Installing Instruction

Healthcare chiller of the KSC Series

Healthcare chiller of the KSC SeriesHealthcare chiller of the KSC Series

Healthcare chiller of the KSC Series

Version „Revision 0

Version „Revision 0Version „Revision 0

Version „Revision 05

5”

” ”

”

Type KSC 215

Type KSC 215Type KSC 215

Type KSC 215-

-L

L-

-U/S

U/SU/S

U/S

page

page page

page 1

1von

vonvon

von39

3939

U:\KSC 215 L\03_Dokumente\Installationsanleitung\KKT_chillers_Installing_Instruction_engl_Vers05.doc

Manufacturer

ManufacturerManufacturer

Manufacturer

ait-deutschland GmbH T +49 9228 9977 0

Industriestraße 3 F +49 9228 9977 149

95359 Kasendorf E info@kkt-chillers.com

Germany W www.kkt-chillers.com

Representative in the US and Service Center

Representative in the US and Service CenterRepresentative in the US and Service Center

Representative in the US and Service Center

KKT chillers, Inc. T 847 734 1600

1280 Landmeier Road F 847 734 1601

Elk Grove TF 866 517 6867

IL 60007 E support@kkt-chillersusa.com

YOUR LOCAL S

YOUR LOCAL SYOUR LOCAL S

YOUR LOCAL SERVICE CONTRACTOR IS:

ERVICE CONTRACTOR IS:ERVICE CONTRACTOR IS:

ERVICE CONTRACTOR IS:

COMPANY NAME:

PHONE NUMBER: FAX NUMBER:

Other manuals for KKT KSC Series

Operating Instruction138 pages

Questions and Answers:

D
Daniel RileyAug 13, 2025
Why KKT Chiller doesn't have enough refrigeration power?
- R
  Richard StoneAug 13, 2025
  Insufficient refrigeration power in your KKT Chiller can stem from several causes: air in the water circuit, a water agitation quantity that has fallen below the minimum, inadequate fresh air supply to the condenser, or insufficient refrigerant in the circuit. To resolve this, vent the system, ensure the water pipe cross-section is correctly designed (potentially opening the check valve fully or increasing the pipe cross-section), ensure sufficient fresh air supply and removal (eliminating any short-circuit between fresh and exhaust air), and locate and seal any leaks before refilling the refrigerant circuit.
E
Eric RobinsonAug 16, 2025
What to do if KKT KSC refrigerating machine starts and stops short-termed?
- S
  santoskristinAug 17, 2025
  If your KKT Chiller's refrigerating machine starts and stops frequently, it may be due to insufficient fresh air supply for the condenser, causing the high-pressure pressostat to protect against overload. Another cause could be low pressure in the refrigerant circuit due to refrigerant leaks, which causes the pressure switch to shut down the compressor. Ensure adequate fresh air supply and eliminate any short-circuits between fresh air and exhaust air. Also, find and seal any refrigerant leaks before refilling the circuit.