Klafs Sauna - User Manual

Operating Instructions
Klafs Sauna/Infrarot/Softclima/Infraclima
with control unit type SL 033 3................................................
Manuel d'utilisation
Klafs Sauna/Infrarot/Softclima/Infraclima
avec commande Type SL 033 25................................................
Instrucciones de operación
Klafs Sauna/Infrarot/Softclima/Infraclima
con control tipo SL 033 47......................................................

Summary

1. Quick reference guide - Control System SL 033

Bathing types

Details the different types of bathing supported by the system: Sauna, Infrared, Softclima, Infraclima.

Technical data - Control System SL 033

Lists the technical specifications and operating conditions for the control system.

2. Intended Use

3. General safety information

4. Operation and display elements

4.1. Display - Control System SL 033

Explains the control panel display, including symbols, buttons, and indicators for system operation.

5. Operation

5.1. Switching the cabin light On;Off

Instructions for turning the cabin light on and off using the control system.

5.2. Setting the time and the water hardness

Guide on how to set the current time and adjust water hardness settings on the control panel.

5.3. Switching standby On;Off

Steps for activating or deactivating the control system's standby mode.

5.4. Starting the sauna

Procedure for initiating a sauna session, including pre-operation checks.

5.5. Starting Infrared

Instructions on how to start an infrared session and what to expect.

5.6. Starting Softclima

Steps for operating the Softclima function, including necessary preparations.

5.7. Starting Infraclima

Guide on how to initiate an Infraclima session and its requirements.

5.8. Ending the program

Details on how to properly end a bathing program, both automatically and manually.

5.9. Wall heater - Starting the evaporator

Instructions for filling and preparing the evaporator for the wall heater.

5.10. Wall heater - Shutting down the evaporator

Steps for draining residual water and cleaning the evaporator for the wall heater.

5.11. PLURIS - Starting the evaporator

Procedure for filling and adding scent to the PLURIS evaporator.

5.12. PLURIS - Shutting down the evaporator

Instructions for draining residual water and cleaning the PLURIS evaporator.

6. Individual settings

6.1. Program selection

How to choose and start a specific operating program from the available options.

6.2. Setting the temperature

Guide on adjusting the desired temperature for the selected bathing program.

6.3. Setting the humidity, Softclima or Infraclima

Instructions for setting humidity levels for Softclima or Infraclima modes.

6.4. Setting the bathing time

How to adjust the duration of the bathing session.

6.5. Setting the preselect operation

Guide on scheduling the start of a program for a future time.

7. If something does not work

7.1. Error indication on the display

Explains how error codes are displayed and what they signify.

7.2. Other possible errors

Troubleshooting guide for common operational issues not indicated by error codes.

8. Maintenance and Cleaning

Dirty benches

Recommendations for cleaning and maintaining the sauna benches.

8.1. Wall heater - Decalcifying the evaporator

Step-by-step instructions for removing limescale from the wall heater's evaporator.

8.2. PLURIS - Decalcifying the evaporator

Procedures for decalcifying the PLURIS unit's evaporator.

9. Notes

10. Addresses

Klafs Sauna Specifications

General

Manufacturer	Klafs
Material	Wood
Heating Type	Electric or wood-burning heater
Capacity	Varies by model (typically 2-8 persons)
Control Panel	Digital
Installation	Indoor or outdoor (depending on model)