Klafs Sauna - 6. Individual settings; 6.1. Program selection; 6.2. Setting the temperature; 6.3. Setting the humidity, Softclima or Infraclima

Sauna/Infrarot/Softclima/Infraclima
PAGE 16
50701103/02.13
6. Individual settings
6.1. Program selection
' For operation follow the prerequisites and the program table on page 9!
FIRE RISK!
Before starting the control system, always check that there are no inflammable objects
on or near the sauna heater.
1. Select the menu with the left/right
Ñ
Ñ
Ñ
buttons.
2. Select the program with the up/down
ÑÑ
Ñ
buttons.
. The changeable value flashes.
3. Confirm the selection with the
button.
. The flashing value changes to a permanent display. After the confirmation the selected bathing
program is started.
6.2. Setting the temperature
' For operation follow the prerequisites and the program table on page 9!
1. Select the menu
with the left/right
Ñ
Ñ
Ñ
buttons.
. The changeable value flashes.
2. Change the flashing value with the up/down
Ñ
Ñ
buttons.
3. Confirm the setting with the
button.
If the value deviates from a standard program, the value is automatically stored in the
individual program of the active bathing program.
6.3. Setting the humidity, Softclima or Infraclima
' For operation follow the prerequisites and the program table on page 9!
1. Select the menu
with the left/right
Ñ
Ñ
Ñ
buttons.
2. Change the nominal value of the bar display
with the up/down
Ñ
Ñ
Ñ
buttons.
3. Confirm the setting with the
button.
If the value deviates from a standard program, the value is automatically stored in the
individual program of the active bathing program.