11.1 Dream Fly Rig
KMA ENDGAME Setup example: Dream Fly Rig
1. Connect your instrument to your favourite drive and other mono pedals, then choose your
preamp of choice from the multitude of great examples available on the market today and
connect that into the input socket.
2. Use ENDGAME’s built in Cabinet Simulations (or your own user dened Impulse
Responses) with ENDGAME’s Power AMP Simulation and connect that directly to the PA.
3. Add some stereo effects in the Stereo FX Loop and you have a complete portable solution
which can be highly exible and with a feature set beyond the capabilities of many heavy
combos, ampliers and cabinets.
Tone Tip:Many mono preamps also can have cabinet and power amp simulation built in. If your
device provides the option to turn on / off their internal cab and power amp modelling etc., this
can give you the additional option of using these or the options within ENDGAME. Remember
though that if you do use external cab and power amp simulation, for the best results you will
need to ensure that these options are turned off on ENDGAME, in order that you are not
duplicating the simulations. For this setup, we also recommend that both FX Loop Position
toggles switches are set to PRE.
To Next Page
Loading...
