KMC Controls 68 Series User Manual

56
HITCHING TO THE IMPLEMENT
! IMPORTANT !
Mast and Hitch Configurations
WARRANTY NOTE: Use of articulated four-wheel drive or track tractors with 3 point lift im-
plements voids the warranty on the toolbar main frame. Sudden turns or steering corrections
made by these types of tractors, when the implement is in the ground, can exert extreme forces
through the implement’s frame and/or shank components and cause unwarranted fatigue/failure.
8 ROW (46” & 48”) STACKFOLD
12 ROW (30”,36”&38”) STACKFOLD
12 ROW (40”)/16 ROW(30”) STACKFOLD
HITCH TYPE:
CAT III-3PT; CAT III-QC
CAT III-NQC
CAT IV-NQC
HITCH TYPE:
CAT II-3PT; CAT II-QC
CAT III-3PT; CAT III-QC
CAT III-NQC
4 ROW(36”,38”&40”)
RIGID TOOLBAR
HITCH TYPE:
CAT III-3PT; CAT III-QC
CAT III-NQC
CAT IV-NQC
6 ROW(36”&38”) RIGID
6 ROW(40”)/8 ROW(30”) RIGID
HITCH TYPE:
CAT III-3PT; CAT III-QC
CAT III-NQC
4-ROW (46” & 48”) RIGID
6 ROW (30”) RIGID
8 ROW (36”38”&40”) STACK

KMC Controls 68 Series Specifications

General

Brand	KMC Controls
Model	68 Series
Category	Farm Equipment
Language	English