76
STORAGE:
The purchase of your Ripper Bedder is a substantial investment to your farming needs. For this
reason, your Ripper Bedder should be cleaned and stored in a manner that will ensure the life and
value of your investment for years to come.
KMC recommends after each season of use to:
• Pressure wash and clean the machine thoroughly to remove all dirt and moisture
retaining materials.
• Repaint worn and scratched parts if possible.
• Grease all bearings, bushings, and pivot joints that are fitted for relube. Also, fully
grease the turnbuckle threads to prevent these areas from rusting and pitting.
• Store under a shelter in a location away from all weather elements if possible.
TIRE INFLATION CHART
It is important that the inflation of all tires be set properly for maximum safety and per-
formance. Use the following guide to adjust the inflation pressure in the tires to match
the application of the machine.
COLD INFLATION PRESSURE VALUES IN PSI
TIRE SIZE COLD INFLATION PRESSURE
7.60 X 15SL (8-PLY)
(Toolbar Gauge Wheels)
52 psi (Cold)
20.5 X 8.00-10 (4 PLY)
(8 X 10 Press Wheels)
35 psi (Cold)
To Next Page
Loading...
Need help?
General
