KMC Controls 68 Series User Manual

72
LUBRICATION POINTS
Several machine components require periodic lubrication: See the “Maintenance Service Sched-
ule” portion of the manual for those periodic lubrication intervals.
The following illustrations highlight those component areas that are fitted for lubrication. In all
these areas it is important to use only a Moly EP Grease with a minimum service interval as described
in the Maintenance Service Schedule.
Reset On The Go Lubrication Points
(7 Per Shank)
GREASE
GREASE
GREASE
GREASE
GREASE
SERVICE
EVERY
HOURS
EVERY
TRIPS
1
RESET ON THE GO SHANKS &
TOGGLE TRIP SHANKS
50 10
OR

KMC Controls 68 Series Specifications

General

Brand	KMC Controls
Model	68 Series
Category	Farm Equipment
Language	English