Key Management Systems Ltd 15 | P a g e
Installation
This section describes how to install the Simplekey 4 system. Installation is only to be
carried out by competent, qualified and experienced personnel trained by KMS.
Wire in accordance with the country of installation’s National Wiring Regulations (UK
BS7671, IEE National Wiring Regulations). Failure to do so can result in injury or death
by electric shock.
The Simplekey 4 System
The Simplekey 4 system comprises:
• System Controller
• Communications Module
• KMS BUS
• Lock Controller
• Reader Interface
• BUS readers
• Locks
• SEM
To Next Page
Loading...