Key Management Systems Ltd 8 | P a g e
presented to a reader the token code is compared with those stored in the controller
memory. If a match is found then the associated lock is released.
Programming
A Simplekey 4 system comes pre-programmed to meet client requirements. Tokens
are assigned to areas providing access to the doors specified by the customer.
To ensure correct programming, the information described in “Information Required
for Setting up a New Block / Area to an Existing Customer Cloud” on page 10 is
required when the order is placed.
Once the system is up and running it is administered via Simplekey Web.
Some basic programming is possible using the controller if a keypad is attached but
this is primarily for maintenance purposes.
The keypad, also called an ‘Engineers Keypad’, is available at a separate cost and is
subject to use and restrictions.
To Next Page
Loading...