KMS Simplekey 4 - Specification; Access Provided; Controller Physical Characteristics; Communications

Key Management Systems Ltd 9 | P a g e
Specification
The following tables provide product details.
Access Provided
Doors: Controls up to 16 doors per System Controller with up to two readers per
door.
Tokens: Up to 10,000.
Controller Physical Characteristics
Dimensions (H x W): 210 x 150mm
Weight: 268g (with CM-4G)
Mounting: Five (3.2mm) fixing holes.
Note: Upgrade controllers are supplied on a variety of backplates to
meet site requirements. Please contact KMS at info@kms.uk.net for
more information.
Communications
Mobile and I.P based communications. See ‘Modem’ section within manual.
Communication interface to additional components (readers etc.): KMS BUS
Memory type: Non-volatile FLASH
Baud rate: 115,200
Operating Parameters
Input voltage range: +12v to 14v DC
Current consumption at +12v DC: Average 160mA, peak 5A, 5A maximum
Lock power: +12v to 14v DC; 2A lock (maximum)
Operating temperature: -10
o
C to 80
o
C (14
o
F to 158
o
F)
Operating humidity: 10% to 85% relative humidity, non-condensing.
Lock relay timer 1 - 255 seconds (default 5 seconds)
Door open timer 0 – 255 seconds (default 0 seconds ( off))