Need help?Do you have a question about the knd DVR and is the answer not in the manual?
Covers electrical shock, fire, moisture risks, and general cautions.
Guidelines for responsible disposal of old electrical and electronic products.
Lists essential safety and operating guidelines to follow before using the unit.
Explains quick setup using graphic icons and their functions.
Details the network toolbar and its icons for remote operation.
Describes playback controls and quick function icons for video playback.
Explains remote controller functions for PTZ (Pan, Tilt, Zoom) operations.
Details the physical connections and configuration for a 16-channel DVR.
Outlines the physical connections and configuration for an 8-channel DVR.
Describes the physical connections and setup for a 4-channel DVR.
Provides step-by-step instructions for installing a hard disk drive.
Guide to logging in and navigating the main menu using mouse or remote control.
Configuration options for recording settings, including HDD full behavior and OSD.
Settings for video quality and frame rate for different record types.
Configuration for event triggers like motion detection and sensor alerts.
Detailed settings for motion detection, including duration, sensitivity, and area setup.
Configuration options for sensor-triggered events and polarity settings.
Setting up recording schedules based on time, motion, or sensor events.
Allows setting holidays to adjust recording schedules based on regional variations.
Adjusts individual camera settings like brightness, contrast, and name.
Manages user accounts, passwords, and permissions for network access.
Defines user roles and access rights to various DVR functions.
Configures network connection types (ADSL, DHCP, LAN) and related settings.
Details the DVR's support for DHCP, LAN, and ADSL network connections.
Enables and configures HTTP server for remote access via web browser.
Configures Dynamic Domain Name System for dynamic IP address management.
Sets up email notifications for events like video loss or motion detection.
Configures PTZ camera control and RS-485 communication settings.
General system settings including DVR name, language, and auto lock.
Customizes display options like OSD, DVR status, and channel names.
Configures date, time, time zone, and internet time synchronization.
Allows setting the time zone and enabling Daylight Saving Time.
Synchronizes DVR time with an internet time server.
Configures device settings like mouse speed, buzzer, and relay outputs for alarms.
Controls channel order and interval for spot video output mode.
Provides access to utility functions like HDD initialization and system upgrade.
Displays system diagnostic information such as firmware version and HDD status.
Options to search recorded events by type or time.
Detailed criteria for searching specific events, including type, time, and channel.
Allows searching for recorded video based on specific dates and times.
Instructions for backing up recorded data to a USB flash drive or other media.
Steps to connect to the DVR remotely using a web browser or software.
Procedure for backing up data remotely from the DVR to a PC.
To Next Page
General