KNF N838 E Series - Page 19

Diaphragm pump N838_E
Transport
Translation of Original Operating and Installation Instruction, KNF 347394-347605
09/23
19
CAUTION
Personal injury and/or property dam-
age due to incorrect or improper trans-
port of the pump
If the pump is raised and/or carried on
the connection during transport, leaks
and/or damages to the pump may re-
sult.
à Do not carry the pump on the
pneumatic connection.
à
Transport the pump in the original packaging to the instal-
lation location.
à
Keep the original packaging of the pump (e.g. for later
storage).
à
Inspect the pump for transport damage after receiving it.
à
Document any transport damage that has occurred.
à
Remove any transport safeguards on the pump prior to
commissioning.
Parameter
Parameter Value
Storage temperature [°C] + 5 to + 40
Transport temperature [°C] - 10 to + 60
Permissible humidity (non-
condensing) [%]
30 to 85
Tab.11: Transport parameters and storage parameters
NOTICE
Prior to commissioning, make sure that
the pump has reached the ambient
temperature (3 Technical data [}12]).
EN
-
US
EN