Vacuum Pump System SC 920G Content
Translation of original Operating Instructions, english, KNF 121308-121311 07/18
Content Page
1.
About this document 4
1.1. Using the Operating Instructions 4
1.2. Symbols and Markings 4
2. Use 5
2.1. Proper Use 5
2.2. Improper Use 5
3. Safety 6
4. Technical Data 8
4.1. Vacuum pump system 8
4.2. Vacuum pump system’s hand
terminal 10
4.3. Software 10
5. Design and Function 11
5.1. Vacuum pump system overwiew 11
5.2. Vacuum pump system functions 13
5.3. Hand terminal 15
5.4. Pump 16
5.5. Gas ballast 16
6. Installation and connection 17
6.1. Installation 17
6.2. Connection 18
7. Operation 19
7.1. Start up 19
7.2. Taking system out of operation 22
8. Operating vacuum pump system 23
8.1. Hand terminal 23
8.1.1. General functions and displays 23
8.1.2. Operation 25
8.1.3. Changing batteries on the hand
terminal 31
8.2. Operation without hand terminal 32
8.3. Software 32
9. Servicing 33
9.1. Servicing Schedule 33
9.2. Cleaning 33
9.2.1. Flushing Vacuum pump system 33
9.2.2. Cleaning Vacuum pump system 33
9.2.3. Emptying collection flask on the
suction and pressure sides 33
9.3. Changing Diaphragms and Valve
Plates 35
9.4. Replace overpressure valve on
high performance condenser 39
10. Troubleshooting 40
11. Ordering Information 45
12. Returns 47
13. Health and safety clearance and
decontamination form 48
To Next Page
Loading...
