Knick Protos 34009(X) - How to Order an Additional Function

5
Device description
Enter this
serial number
when ordering
an additional function.
Device description
Return
22.7 °C
0.003mS/cm
Protos operating panel
Module FRONT 3400-011
Hardware: 2, Software: 9.0
Serial number: 3730737
BASE
Module
FRONT
Additional functions expand the device capabilities.
The additional functions are device-specific. When ordering an additional
function, you therefore have to specify the serial number of your FRONT
module in addition to the respective order number.
(The FRONT module contains the Protos system control).
The manufacturer then supplies a TAN (transaction number) to release the
additional function.
Serial number of FRONT module
How to Order an Additional Function
Device-specific TAN (transaction number)
Menu
Display Serial number FRONT module
Menu selection
Open diagnostics.
From the measuring mode:
Press menu key to select menu.
Select diagnostics using arrow keys,
confirm by pressing enter.
Menu selection
Return to meas
0.002mS/cm
23.7 °C
Select:
[enter]
Lingua
Diagnostics
Return
23.7 °C
Set favorite
0.003mS/cm
Logbook
Message list
Device description
Module FRONT
Module CONDI 3400-051
Module BASE
Diagnostics
Select “Device description” using arrow
keys, confirm by pressing enter.