10. Maintaining the machine
10.1 Daily maintenance
The operator of the machine or someone with an equivalent level of training may
carry out daily maintenance.
Warning!
Do not touch hot parts of the machine, such as the engine, exhaust, and
hydraulic system.
If you notice that something is wrong with a component, look for a solution
promptly. Where specified, the operator may resolve the problem. Contact a
recognized maintenance engineer for a resolution to other problems.
1 Lubricate the hinge points of the machine.
For more information, see Lubricating the hinge points on page 68.
2 Check that all requirements from the maintenance table have been satisfied
with the machine switched off.
For more information, see Maintenance table – maintenance of machine when
switched off on page 58.
3 Check that all requirements from the maintenance table have been satisfied
with the machine switched on.
For more information, see Maintenance table – maintenance of machine when
switched on on page 59.
4 Check that all requirements from the maintenance table have been satisfied in
terms of periodic maintenance.
For more information, see Periodic maintenance (accredited maintenance
engineer) on page 59.
Maintaining the machine
57
To Next Page
Loading...