Figure 50: Topping up the coolant
1 Open the engine compartment.
For more information, see Opening the engine compartment on page 62.
2 Remove the cap (A) from the radiator.
Allow excess pressure to escape before fully removing the cap.
3 Top up the coolant to the FULL mark on the reservoir.
For the correct type of coolant, see Consumables on page 88.
4 Screw the cap back onto the radiator.
5 Close and lock the engine compartment.
10.12 Checking/topping up the hydraulic fluid
Before starting – the temperature of the hydraulic fluid must be approx. 20ºC, the
hydraulic attachment must be in the lowermost position, and all other cylinders
must be retracted.
Maintaining the machine
75
To Next Page
Loading...