KNOTT KS30 - Theft Protector Information

Stabilisierungskugelkupplung – Montage- und Betriebsanleitung
16version 4.00/2020 . 209692.002
9.6 Theft protector:
To prevent theft of the stabilising coupling head or the entire trailer, special theft
protectors are available for the coupling heads KS25, KS30 and KS35.
Before locking, in both cases, the coupling head must be brought into the close
position by inserting the KSB50 SafetyBall (included in the scope of supply of the
theft protectors listed below) and then the hand lever must be pressed completely
down.
CAUTION – Risk of crushing:
Do not reach into the open stabilising coupling head with your ngers.
The spring-loaded closing mechanism could trigger, resulting in injury to
your ngers.
Variant a) Lock 210709.001
Variant b) Lock 210709.001
This variant also prevents unauthorised removal of the coupling head from the
trailer. Therefore this variant also satises enhanced security requirements
IMPORTANT:
It is essential that you write down the number of the key in a secure place.
If the key is lost, a spare key can only be ordered with this number!