Kodak Professional large format 4000 series printers
10
Setting the language
With the appropriate firmware version, your printer displays menu items and
messages in English, German, French, Italian, Portuguese, Spanish, Japanese,
Simplified Chinese, Traditional Chinese or Korean.
➪ To change the language
1 Press Setup/User Setup/Language, and select the language you
want.
2 Press OK.
Loading media
You can use either roll or single sheet media. To ensure straight paper loading
and avoid skewing, be sure to hold the media parallel to the platen. Use the load
lines on the platen as a guide to correctly align the media. Be sure to load from
the back only. Set the media guides to the width of the media.
! Depending on the model, the printer can use media up to 60" wide. The rolls can
be heavy, so you may want to have someone help you to load them.
! If your roll media has wrinkled or damaged edges, cut off the damaged part of
the roll prior to loading to prevent the media from jamming in the printer.
➪ To load roll media:
1 Slide the roll media onto the top roller, orienting it as shown below.
Slide the media guide into the roll core, and tighten the guide to
secure the roll. Insert the media's leading edge into the back of the
printer, aligning the paper edge with the alignment mark on the
platen. The printer will sense the presence of the media and feed it
automatically.
To Next Page
Loading...
Need help?
General
