Kodak Professional large format 4000 series printers
22
Clogged jets
Clogged jets cannot be automatically detected and therefore must be cleared
manually. If a jet is clogged, it appears in the prime pattern as a gap in the
sloping line for each cartridge.
To clear a clogged jet, clean and prime the affected cartridge according to the
Maintenance Guide on your system CD-ROM to eliminate all gaps in the “stair
step” pattern before starting your job.
➪ To print the manual jet compensation list:
1 From the main menu, select Utility Menu/Calibration Menu/Open
Jet Menu/Print Jet List.
The jet status list prints as illustrated below, showing current jet
compensation list by number for each cartridge.
To Next Page
Loading...
