Kodak 4000 series - Aligning the Ink Cartridges

ENGLISH
Kodak Professional large format 4000 series printers
23
Manual Jet Compensation List
Y: None
M: 1,3,10
C: None
K: 10, 21, 30, 128
2 To add a jet to the compensation list, press the button that
designates the color of the cartridge where the jet resides.
l
Black Edit List Print Jet List
l
l
Cyan Edit List Clear List Menu
l
l
Magenta Edit List
l
l
Yellow Edit List Exit
l
3 To compensate for a specific jet, press the button until the number
of the jet is displayed. Press the Toggle button.
4 Repeat Steps 1-3 for any other jets needing compensation.
5 Press OK to accept the settings.
If you have manually compensated for jets in any cartridge, be sure
to clear the compensation when a new cartridge is installed by
pressing Clear List Menu. Manual compensation settings are
cleared when the printer is turned off.
Aligning the ink cartridges
The Color Deadband Compensation and Color Calibration tests are provided to
help you align the cartridges.
Color deadband compensation is a method for adjusting dot placement. In
bidirectional printing mode, the velocity of the carriage causes dots to miss the
target area on the media. The color deadband test pattern lets you check the
velocity deadband values and adjust them for the best printing results. A
magnifier is provided in the accessory box to help you check the prints.