Kodak 5500 - Set Date; Patch Reader; Front Document Printer; Rear Document Printer

A-61075 March 1997
FC-6
Code Function Code Name Description
F22 Set Date Allows you to set the date on the Status Display:
The format is YYYY/MM/DD, where YYYY is the year,
MM is the month, and DD is the day.
F23 Display Date and Allows you to view the time and date in the Status
Time Display in the format selected during installation.
F40 Front and Rear Allows you to enable/disable the Front and Rear
Document Printers Document Printers. Enter the number one (1) to enable
On/Off or the number zero (0) to disable.
F41 Front Document Allows you to enable/disable the Front Document Printer.
Printer (On/Off) Enter the number one (1) to enable or the number zero
(0) to disable.
F42 Rear Document Allows you to enable/disable the Rear Document Printer.
Printer (On/Off) Enter the number one (1) to enable or the number zero
(0) to disable.
F44 Omit Printing on Allows you to specify that no information be printed on
the Next Document the next document scanned. Printing will resume on
Only subsequent documents. Enter the number one (1) to
enable.
F45 Print Test Allows you to test for print position, print quality, and
print message contents.
F46 Front Document Allows you to specify how far from the leading edge of
Printer Vertical the documents printed information will appear. Use the
Start Print Position numeric keys to input values between 0.125 and 20
inches (in increments of 0.125 inches) or 3 to 508
millimetres (in increments of 3 millimetres).
F47 Rear Document Allows you to specify how far from the leading edge of
Printer Vertical the documents printed information will appear. Use the
Start Print Position numeric keys to input values between 0.125 and 20
inches (in increments of 0.125 inches) or 3 to 508
millimetres (in increments of 3 millimetres).
F48 Purge Print Heads Allows you to purge and clean slightly hardened ink from
the Document Printer(s) print head(s). Feed a single
blank document.
F50 Patch Reader On/Off Allows you to enable/disable the Patch Reader. Enter
the number one (1) to enable or the number zero (0) to
disable.