A-61075 March 1997
FC-7
Code Function Code Name Description
F53 Patch Reader Allows you to enable/disable the confirmation tone which
Confirmation Tone informs you when the Patch Reader has successfully
On/Off read a patch document. Enter the number one (1) to
enable or the number zero (0) to disable.
F54 Omit Patch Reading Allows you to inhibit patch reading on the next document
on the Next Document scanned. Patch Reading will resume on subsequent
Only documents. Enter the number one (1) to enable.
F55 Patch Test Allows you to test for patch position and patch quality.
F60 Bar Code Reader Allows you to enable/disable the Bar Code Reader.
On/Off Enter the number one (1) to enable or the number zero
(0) to disable.
F63 Bar Code Reader Allows you to enable/disable the confirmation tone which
Confirmation Tone informs you when the Bar Code Reader has successfully
On/Off read a bar code document. Enter the number one (1) to
enable or the number zero (0) to disable.
F64 Omit Bar Code Allows you to inhibit bar code reading on the next
Reading on the Next document scanned. Bar Code Reading will resume on
Document Only subsequent documents. Enter the number one (1) to
enable.
F65 Bar Code Test Allows you to test for bar code position, bar code quality,
and bar code read rate.
F70 Length Monitor Allows you to enable/disable the length monitor which
On/Off monitors the length of the document(s) scanned using
predefined minimum/maximum allowable lengths.
Enter the number one (1) to enable or the number zero
(0) to disable.
F71 Omit Length Monitor Allows you to inhibit length monitoring on the next
on the Next Document document scanned. Length monitoring will resume on
Only subsequent documents. Enter the number one (1) to
enable.
F72 Skew Monitor Allows you to enable/disable the skew monitor which
On/Off monitors the amount of skew using predefined allowable
skew angle(s). Enter the number one (1) to enable or the
number zero (0) to disable.
To Next Page
Loading...
