A-61075 March 1997
OM-11
Error Code Number And Message Required Action(s)
Operator Action
Press the C (clear/cancel) key to clear the error
message. This error message is just a warning to the
operator; if the error message is cleared by pressing
the C (clear/cancel) key, normal scanning can be
performed. If the error message persists, contact the
system administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
Operator Action
Press the C (clear/cancel) key to clear the error
message. This error message is just a warning to the
operator; if the error message is cleared by pressing
the C (clear/cancel) key, normal scanning can be
performed. If the error message persists, contact the
system administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
Operator Action
Press the C (clear/cancel) key to clear the error
message (optional), then press the F key to input the
function code that enables the desired accessory.
This error message is just a warning to the operator; if
the error message is cleared by pressing the C (clear/
cancel) key, normal scanning can be performed. If the
error message persists, contact the system
administrator.
System Administrator Action
Verify correct operation. If the error message persists,
call service.
E135_Printer
Hardware_Error
E136_Bar_Code
Hardware_Error
E138_Accessory
Off_Via_Fnc_Code
To Next Page
Loading...
