9
ATTACHING THE STRAP
1. Insert the shorter looped end of the
strap behind the strap post (17).
2. Thread the longer end of the strap
through the shorter loop.
3. Pull the strap tight.
4. Press the enter/self-timer button (21)
to store the selected number(s) and to
activate the next “blinking” number(s).
5. Follow steps 3 and 4 to continue your
selection or press the enter/self-timer
button again to stop the number(s)
from blinking and to end your
selection.
SELECT
MENU
ENTER
To Next Page
Loading...
