26
PRINT-QUANTITY SELECTION
Before you take a picture, choose the
number of prints, from 0 to 9, that you
want. This service is dependent
on the photofinisher’s capability.
1. Repeatedly press the menu
button (23) until
“PRINT QTY”
and
“P 1
” appears on the LCD panel (14).
2. Press the right or left side of the zoom
dial (2) or the select button (22) to
select the number of prints
you want.
3. Press the enter/self-timer
button (21) to store the information.
• After you take the picture, the print
quantity defaults to 1.
Remember you must select a print
quantity before you take a picture.
ISO FILM-SPEED DISPLAY
View the ISO film speed of the film on the
LCD panel (14) when you first turn on
the camera. The LCD panel displays the
ISO speed for approximately 3 seconds
and then returns to the date display.
FILL
LEFT
EXP
AUTO
MODE
ISO
FILL
SELECT
MENU
LEFT
EXP
AUTO
ENTER
PRINT
QTY
MODE
To Next Page
Loading...
Need help?
General
