12
Look for this logo to be certain that the film you buy is
made for this camera.
2. Insert the film cassette completely
into the film chamber. Make sure the
Film Status Indicator (FSI) on the film
cassette is at ● (#1 position) for a
new cassette or at ◗ (#2 position) for
a partially exposed cassette.
• Do not force the film cassette
into the film chamber.
3. Close the film door to start the auto-
film advance. The frame counter (37)
on the LCD panel (14) shows the
number of pictures remaining on the
film cassette.
1
2
3
4
Look for this logo to select a certified photofinisher for
developing your film and to assure that you get all the
features of the Advanced Photo System.
To Next Page
Loading...
Need help?
General
