FORWARD
AND
REVERSE
BUTTONS
FORWARD and REVERSE BUTTONS, located
on
the side of the
projector, control the direction in which the tray rotates.
Briefly press the forward
or
reverse button to change
slides in the desired direction.
You must press the reverse
button
firmly.
FOCUS
Rotate the FOCUS KNOB or move the
FOCUS
lever
on
the
re-
mote control until the projected image is sharp.
LEVELING
FOOT
FOCUS KNOB
REMOTE
CONTROL
The
remote control
has
both
FOR
(forward) and
REV
(re-
verse) buttons for controlling the direction in which the
slide tray rotates. Briefly press either the forward
or
the
reverse button to change slides in the desired direction.
You
must
press the reverse button
firmly.
IMPORTANT: If the reverse button is not pressed
firmly, the tray may rotate in a forward direction.
The
remote control also
has
a
FOCUS
lever for power·
focusing the lens. Moving the lever forward and backward
causes the projection lens to move forward and backward,
respectively.
9
To Next Page
Loading...
Need help?
General
